How to Find Hidden Piping and Valves
It is important that you know the details of your home like the back of your hand in case you are a homeowner. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. Having such a piping usually means that you have a high-pressure gas system for your home. The shutoff valves of such systems are usually located near the water heater or the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.